Describing of photos of the Wind vane and Rain gauge

These are the images before and after we made the Rain gauge and Wind vane.There are also images of the materials used to make them.We made them by
                     Rain gauge:We took a rain gauge ruler and pasted it on a clear plastic bottle.When it rains,we would just calculate the amount of rain collected by using the rain gauge ruler.
                    Wind vane: We took a paper plate and marked  its ends with the directions such as north,south,east and west.Then,we took another paper plate and cut out the arrow and arrow tail shapes.We took a straw and cut small slits at each end and put the arrow and arrow tail at either sides.After that,we took a pencil and poked it through the center of the paper plate with the directions.We used a safety pin to poke through the straw and the eraser of the pencil to join them together.Then,we just used a compass pointing to the north direction to calculate the direction of wind and how windy it was.

This is  for the data plotting on excel:

	Our recordings:		NEA weather records:
	1st June(Wednesday)		1st June(Wednesday)
	Location: Ahmad Ibrahim Secondary School		Location: Ahmad Ibrahim Secondary School
	Wind Direction: North		Wind Direction: North
	Rainfall amount: 17mm		Rainfall amount: 19mm
	Our recordings:		Column1
			NEA weather records :
	Date : 2nd June ( Thrusday  )		Date: 2nd June ( Thrusday )
	Location : Ahmad Ibrahim Secondary School		Location : Ahmad Ibrahim Secondary School
	Wind Direction : North-East		Wind Direction : North
	Amount of Rainfall :  0mm		Rainfall amount : 0mm
			NEA weather records
	Our recordings
			Date:3rd June
	Date:3rd June		Location:Ahmad Ibrahim Secondary School
	Location:Ahmad Ibrahim Secondary School		Wind direction:South
	Wind direction:South		Amount of rainfall:28mm
	Amount of rainfall:28mm

Photos of the Wind vane and Rain gauge